ABR-BWS2 1549DAWS840T1400 | 0660984

Light control solution package for 1 field sports halls. The lighting in the fields of the sports hall can be switched on separately via a touch panel to the three light levels of 100%, 60% and 20% and also switched off again immediately. In addition, the lighting in all fields can be dimmed up and down individually. All luminaires and lighting control components must be preconfigured so that they only need to be electrically connected and switched on on site (plug & play). Additional activities such as setting light values and functional behaviour are no longer necessary. Nevertheless, it is still possible to adjust the configurations and settings of the luminaire and lighting control components centrally via a corresponding DALI/PC interface with free PC software if required. The interface has an integrated flash memory on which the configurations and settings of all components can be saved. All lighting control components are supplied complete as a solution package with an enclosed connection diagram.

Light control solution package for 2 field sports halls. The lighting in the fields of the sports hall can be switched on separately via a touch panel to the three light levels of 100%, 60% and 20% and also switched off again immediately. In addition, the lighting in all fields can be dimmed up and down individually. All luminaires and lighting control components must be preconfigured so that they only need to be electrically connected and switched on on site (plug & play). Additional activities such as setting light values and functional behaviour are no longer necessary. Nevertheless, it is still possible to adjust the configurations and settings of the luminaire and lighting control components centrally via a corresponding DALI/PC interface with free PC software if required. The interface has an integrated flash memory on which the configurations and settings of all components can be saved. All lighting control components are supplied complete as a solution package with an enclosed connection diagram.

Light control solution package for 3 field sports halls. The lighting in the fields of the sports hall can be switched on separately via a touch panel to the three light levels of 100%, 60% and 20% and also switched off again immediately. In addition, the lighting in all fields can be dimmed up and down individually. All luminaires and lighting control components must be preconfigured so that they only need to be electrically connected and switched on on site (plug & play). Additional activities such as setting light values and functional behaviour are no longer necessary. Nevertheless, it is still possible to adjust the configurations and settings of the luminaire and lighting control components centrally via a corresponding DALI/PC interface with free PC software if required. The interface has an integrated flash memory on which the configurations and settings of all components can be saved. All lighting control components are supplied complete as a solution package with an enclosed connection diagram.

Light control solution package for 1 field sports halls. The lighting in the fields of the sports hall can be switched on separately via a touch panel to the three light levels of 100%, 60% and 20% and also switched off again immediately. In addition, the lighting in all fields can be dimmed up and down individually. Switching on takes place either via the touch panel or via the motion detectors if motion is detected. After switching on via the touch panel, the lighting switches off again automatically after 15 minutes if the sports hall has not been entered or the motion sensors in the respective hall field have not detected any movement. However, if the field is entered within this time so that the motion sensors detect movement, the 15-minute run-on time starts again and the lighting remains switched on at the previously set value. Each movement detected by the sensors restarts the run-on time. After leaving the respective hall area, or after the last movement in the detection field of the sensors, the lighting switches off automatically after 15 minutes, so that it is always ensured that the light does not remain switched on. All luminaires and lighting control components must be preconfigured so that they only need to be electrically connected and switched on on site (plug & play). Additional activities such as setting run-on times, light values and functional behaviour are no longer required. Nevertheless, it is still possible to adjust the configurations and settings of the luminaire and lighting control components centrally via a corresponding DALI/PC interface with free PC software if required. The interface has an integrated flash memory on which the configurations and settings of all components can be saved. All lighting control components are supplied complete as a solution package with an enclosed connection diagram.

Light control solution package for 2 field sports halls. The lighting in the fields of the sports hall can be switched on separately via a touch panel to the three light levels of 100%, 60% and 20% and also switched off again immediately. In addition, the lighting in all fields can be dimmed up and down individually. Switching on takes place either via the touch panel or via the motion detectors if motion is detected. After switching on via the touch panel, the lighting switches off again automatically after 15 minutes if the sports hall has not been entered or the motion sensors in the respective hall field have not detected any movement. However, if the field is entered within this time so that the motion sensors detect movement, the 15-minute run-on time starts again and the lighting remains switched on at the previously set value. Each movement detected by the sensors restarts the run-on time. After leaving the respective hall area, or after the last movement in the detection field of the sensors, the lighting switches off automatically after 15 minutes, so that it is always ensured that the light does not remain switched on. All luminaires and lighting control components must be preconfigured so that they only need to be electrically connected and switched on on site (plug & play). Additional activities such as setting run-on times, light values and functional behaviour are no longer required. Nevertheless, it is still possible to adjust the configurations and settings of the luminaire and lighting control components centrally via a corresponding DALI/PC interface with free PC software if required. The interface has an integrated flash memory on which the configurations and settings of all components can be saved. All lighting control components are supplied complete as a solution package with an enclosed connection diagram.

Light control solution package for 3 field sports halls. The lighting in the fields of the sports hall can be switched on separately via a touch panel to the three light levels of 100%, 60% and 20% and also switched off again immediately. In addition, the lighting in all fields can be dimmed up and down individually. Switching on takes place either via the touch panel or via the motion detectors if motion is detected. After switching on via the touch panel, the lighting switches off again automatically after 15 minutes if the sports hall has not been entered or the motion sensors in the respective hall field have not detected any movement. However, if the field is entered within this time so that the motion sensors detect movement, the 15-minute run-on time starts again and the lighting remains switched on at the previously set value. Each movement detected by the sensors restarts the run-on time. After leaving the respective hall area, or after the last movement in the detection field of the sensors, the lighting switches off automatically after 15 minutes, so that it is always ensured that the light does not remain switched on. All luminaires and lighting control components must be preconfigured so that they only need to be electrically connected and switched on on site (plug & play). Additional activities such as setting run-on times, light values and functional behaviour are no longer required. Nevertheless, it is still possible to adjust the configurations and settings of the luminaire and lighting control components centrally via a corresponding DALI/PC interface with free PC software if required. The interface has an integrated flash memory on which the configurations and settings of all components can be saved. All lighting control components are supplied complete as a solution package with an enclosed connection diagram.

Light control solution package for 1 field sports halls. The lighting in the fields of the sports hall can be switched on and off again separately to the three light levels 100%, 60% and 20% via a DALI touch panel. In addition, the lighting in all areas can be dimmed up and down individually. After switching on via the touch panel, the lighting automatically adjusts to the previously selected light value of 100%, 60% or 20% depending on the daylight. If the lighting is set to an individual dimming value, the set value is retained and the lighting is no longer controlled depending on the daylight. All lighting control components are supplied complete as a solution package with an enclosed connection diagram.

Light control solution package for 2 field sports halls. The lighting in the fields of the sports hall can be switched on and off again separately to the three light levels 100%, 60% and 20% via a DALI touch panel. In addition, the lighting in all areas can be dimmed up and down individually. After switching on via the touch panel, the lighting automatically adjusts to the previously selected light value of 100%, 60% or 20% depending on the daylight. If the lighting is set to an individual dimming value, the set value is retained and the lighting is no longer controlled depending on the daylight. All lighting control components are supplied complete as a solution package with an enclosed connection diagram.

Light control solution package for 3 field sports halls. The lighting in the fields of the sports hall can be switched on and off again separately to the three light levels 100%, 60% and 20% via a DALI touch panel. In addition, the lighting in all areas can be dimmed up and down individually. After switching on via the touch panel, the lighting automatically adjusts to the previously selected light value of 100%, 60% or 20% depending on the daylight. If the lighting is set to an individual dimming value, the set value is retained and the lighting is no longer controlled depending on the daylight. All lighting control components are supplied complete as a solution package with an enclosed connection diagram.

Light control solution package for 1 field sports halls. The lighting in the fields of the sports hall can be switched on and off again separately via a DALI touch panel to the three light levels of 100%, 60% and 20%. In addition, the lighting in all areas can be dimmed up and down individually. Switching on takes place either via the touch panel or via the motion detectors, provided motion is detected. After switching on via the touch panel, the lighting switches off again automatically after 15 minutes if the sports hall has not been entered or the motion sensors in the respective hall field have not detected any movement. However, if the field is entered within this time so that the motion sensors detect movement, the 15-minute run-on time starts again and the lighting remains switched on at the previously set value. Each movement detected by the sensors restarts the run-on time. After leaving the respective hall area, or after the last movement in the detection field of the sensors, the lighting switches off automatically after 15 minutes, so that it is always ensured that the light does not remain switched on. After switching on via the touch panel or via the motion detectors, the lighting automatically adjusts to the previously selected light value of 100%, 60% or 20% depending on the daylight. If the lighting is set to an individual dimming value, the set value is retained and the lighting is no longer controlled depending on the daylight. All lighting control components are supplied complete as a solution package with an enclosed connection diagram.

Light control solution package for 2 field sports halls. The lighting in the fields of the sports hall can be switched on and off again separately via a DALI touch panel to the three light levels of 100%, 60% and 20%. In addition, the lighting in all areas can be dimmed up and down individually. Switching on takes place either via the touch panel or via the motion detectors, provided motion is detected. After switching on via the touch panel, the lighting switches off again automatically after 15 minutes if the sports hall has not been entered or the motion sensors in the respective hall field have not detected any movement. However, if the field is entered within this time so that the motion sensors detect movement, the 15-minute run-on time starts again and the lighting remains switched on at the previously set value. Each movement detected by the sensors restarts the run-on time. After leaving the respective hall area, or after the last movement in the detection field of the sensors, the lighting switches off automatically after 15 minutes, so that it is always ensured that the light does not remain switched on. After switching on via the touch panel or via the motion detectors, the lighting automatically adjusts to the previously selected light value of 100%, 60% or 20% depending on the daylight. If the lighting is set to an individual dimming value, the set value is retained and the lighting is no longer controlled depending on the daylight. All lighting control components are supplied complete as a solution package with an enclosed connection diagram.

Light control solution package for 3 field sports halls. The lighting in the fields of the sports hall can be switched on and off again separately via a DALI touch panel to the three light levels of 100%, 60% and 20%. In addition, the lighting in all areas can be dimmed up and down individually. Switching on takes place either via the touch panel or via the motion detectors, provided motion is detected. After switching on via the touch panel, the lighting switches off again automatically after 15 minutes if the sports hall has not been entered or the motion sensors in the respective hall field have not detected any movement. However, if the field is entered within this time so that the motion sensors detect movement, the 15-minute run-on time starts again and the lighting remains switched on at the previously set value. Each movement detected by the sensors restarts the run-on time. After leaving the respective hall area, or after the last movement in the detection field of the sensors, the lighting switches off automatically after 15 minutes, so that it is always ensured that the light does not remain switched on. After switching on via the touch panel or via the motion detectors, the lighting automatically adjusts to the previously selected light value of 100%, 60% or 20% depending on the daylight. If the lighting is set to an individual dimming value, the set value is retained and the lighting is no longer controlled depending on the daylight. All lighting control components are supplied complete as a solution package with an enclosed connection diagram.