VLGFP-SN1501-7DAWS840B0800-MR | 1561300
Product Description
Gear tray VLGFP-SN from the RIDI LINIA product family. Optical control via Cover longitudinal prismatic, beam pattern symmetric, extremely wide beam, light emission direct. Lamps LED-M installed, Replacement by specialist possible. The luminaire generates a rated luminous flux of 7590 lm in light colour 840. The long LED service life enables long use with consistent lighting quality. High quality of light thanks to a standard colour tolerance of < 3 SDCM. Housing made of Aluminium, traffic white, similar to RAL 9016, protection rating IP20 IP40 room side. Mounting: Simple clipping in for electrical contacting and mechanical fastening in the system-bound LINIA trunking system. With electronic electrical component DALI-2. Replacement by specialist. Rated voltage 220 - 240 V AC/DC 50 - 60 Hz. With light and motion detector. Detection range crosswise Ø 6 m, detection field 28 m². VLGFP-SN...MR (master) and VLGFP...DA... (slave), purple colour coding, as master-slave combination for mounting in VLTM-7 or VLTM-11. The motion detector controls the controller in the gear tray. If the control signal is passed on from the master gear tray via several trunking units, the control signal must be interrupted after a maximum of three slave gear trays. To do this, use a 5-core connector for the VLTM-7 and manually remove control lines 4 and 5 for the VLTM-11. Factory setting: After the last detected movement, the light level remains at 100% for the follow-up time of 5 minutes. After that, dimming to 10%. After a further 30 seconds, the luminaire is switched off. A maximum of 3 DALI gear trays can be added to a master device tray. Individual setting possible via app.
Note regarding refurbishing: When replacing T16/T26 gear trays with LED gear trays, two safety clamps each are to be mounted to secure the gear tray in the trunking (see trunking accessories).
These luminaires comply with the stipulations of the Food Hygiene Act as defined by Regulation (EC) No. 852/2004 (HACCP) Annex II Chapter I section 2 a, b, Chapter II section 1c relating to luminaires.
They are suitable for use in sales, storage and administrative areas for packaged food.
Order Information
| Item number | 1561300 |
| GTIN | 4029299533101 |
| Delivery commitment | on demand |
General
| Product category | Gear tray |
| Product sub-category | VLGFP-SN |
| Range of application | Education | Office | Retail | Industry | Food |
| Range of application HACCP | Packaged food |
| Sensor | Light | Movement |
Dimensions
| Dimension L | 1500 mm |
| Dimension B | 67 mm |
| Dimension H | 66 mm |
| Net weight | 1.909 kg |
Mounting
| Mounting type | Power rail |
| Mounting position | Trunking |
| Connection type | Power rail adapter |
| Number of poles | 7 |
Housing
| Colour | traffic white, similar to RAL 9016 |
| Protection class | IP20 | IP40 room side |
| Impact resistance | IK03 |
| Glow-wire test | 650 °C |
| Permissible ambient temperature | -25–31 °C |
| Housing material | Aluminium |
| Cover material | PMMA clear |
Electrical version
| Type of control | DALI-2 |
| Nominal voltage | 220–240 V, 0/50–60 Hz |
| Rated power | 52.0 W |
| Protection class | I |
Lighting technology
| Light distributor | Cover longitudinal prismatic |
| Light emission | direct |
| Light distribution | symmetric |
| Beam characteristics | wide beam |
| UGR class | > 25 |
| Rated luminous flux | 7590 lm |
| Luminaire efficiency | 146 lm/W |
Light source
| Lamp | LED-M |
| Lamp included | Yes |
| Colour rendering index Ra | ≥ 80 |
| Farbwiedergabeindex R9 | 0 |
| Colour temperature | 4000 K |
| Colour location tolerance (SDCM) | < 3 SDCM |
| Rated life L80B50 (tq = 25 °C) | 60.000 h |
| Rated life L80B10 (tq = 25 °C) | 45.000 h |
Sensor technology
| Transverse detection range | Ø 6 m |
| Presence detection range | Ø 3 m |
| Angle of coverage | 360° |
| Detection field | 28 m² |
| Optimum mounting height | 2.5 m |
| Maximum mounting height | 5 m |
| Brightness setpoint | 10 - 1000 lx |
Download Center
Approvals:
Please select an application area or adjust the parameters individually needs.
Office | Classroom
500 lx / 0,75 m
Recreational areas
200 lx / 0,75 m
Hallway
100 lx / 0,00 m
Gym | Competition
500 lx / 0,00 m
Production | Assembly
500 lx / 0,85 m
Warehouse
200 lx / 0,00 mOffice | Classroom
Gear tray VLGFP-SN from the RIDI LINIA product family. Optical control via Cover longitudinal prismatic, beam pattern symmetric, extremely wide beam, light emission direct. Lamps LED-M installed, Replacement by specialist possible. The luminaire generates a rated luminous flux of 7590 lm in light colour 840. The long LED service life enables long use with consistent lighting quality. High quality of light thanks to a standard colour tolerance of < 3 SDCM. Housing made of Aluminium, traffic white, similar to RAL 9016, protection rating IP20 IP40 room side. Mounting: Simple clipping in for electrical contacting and mechanical fastening in the system-bound LINIA trunking system. With electronic electrical component DALI-2. Replacement by specialist. Rated voltage 220 - 240 V AC/DC 50 - 60 Hz. With light and motion detector. Detection range crosswise Ø 6 m, detection field 28 m². VLGFP-SN...MR (master) and VLGFP...DA... (slave), purple colour coding, as master-slave combination for mounting in VLTM-7 or VLTM-11. The motion detector controls the controller in the gear tray. If the control signal is passed on from the master gear tray via several trunking units, the control signal must be interrupted after a maximum of three slave gear trays. To do this, use a 5-core connector for the VLTM-7 and manually remove control lines 4 and 5 for the VLTM-11. Factory setting: After the last detected movement, the light level remains at 100% for the follow-up time of 5 minutes. After that, dimming to 10%. After a further 30 seconds, the luminaire is switched off. A maximum of 3 DALI gear trays can be added to a master device tray. Individual setting possible via app.
Note regarding refurbishing: When replacing T16/T26 gear trays with LED gear trays, two safety clamps each are to be mounted to secure the gear tray in the trunking (see trunking accessories).
These luminaires comply with the stipulations of the Food Hygiene Act as defined by Regulation (EC) No. 852/2004 (HACCP) Annex II Chapter I section 2 a, b, Chapter II section 1c relating to luminaires.
They are suitable for use in sales, storage and administrative areas for packaged food.
Order Information
| Item number | 1561300 |
| GTIN | 4029299533101 |
General
| Product category | Gear tray |
| Product sub-category | VLGFP-SN |
| Range of application | Education | Office | Retail | Industry | Food |
| Range of application HACCP | Packaged food |
| Sensor | Light | Movement |
Dimensions
| Dimension L | 1500 mm |
| Dimension B | 67 mm |
| Dimension H | 66 mm |
| Net weight | 1.909 kg |
Mounting
| Mounting type | Power rail |
| Mounting position | Trunking |
| Connection type | Power rail adapter |
| Number of poles | 7 |
Housing
| Colour | traffic white, similar to RAL 9016 |
| Protection class | IP20 | IP40 room side |
| Impact resistance | IK03 |
| Glow-wire test | 650 °C |
| Permissible ambient temperature | -25–31 °C |
| Housing material | Aluminium |
| Cover material | PMMA clear |
Electrical version
| Type of control | DALI-2 |
| Nominal voltage | 220–240 V, 0/50–60 Hz |
| Rated power | 52.0 W |
| Protection class | I |
Lighting technology
| Light distributor | Cover longitudinal prismatic |
| Light emission | direct |
| Light distribution | symmetric |
| Beam characteristics | wide beam |
| UGR class | > 25 |
| Rated luminous flux | 7590 lm |
| Luminaire efficiency | 146 lm/W |
Light source
| Lamp | LED-M |
| Lamp included | Yes |
| Colour rendering index Ra | ≥ 80 |
| Colour temperature | 4000 K |
| Colour location tolerance (SDCM) | < 3 SDCM |
| Rated life L80B50 (tq = 25 °C) | 60.000 h |
| Rated life L80B10 (tq = 25 °C) | 45.000 h |
Sensor technology
| Transverse detection range | Ø 6 m |
| Presence detection range | Ø 3 m |
| Angle of coverage | 360° |
| Detection field | 28 m² |
| Optimum mounting height | 2.5 m |
| Maximum mounting height | 5 m |
| Brightness setpoint | 10 - 1000 lx |
Download Center
Light distribution curve
Approvals:
Attributes:
Please select an application area or adjust the parameters individually needs.
Office | Classroom
500 lx / 0,75 m
Recreational areas
200 lx / 0,75 m
Hallway
100 lx / 0,00 m
Gym | Competition
500 lx / 0,00 m
Production | Assembly
500 lx / 0,85 m
Warehouse
200 lx / 0,00 m